Compact contact extensometer (direct strain measurement)
FDM-100
Compact and very lightweight extensometer for direct strain measurement on sensitive material samples.
Universal Testing Machines (UTM) accessories and fixtures
Touchscreen controller for universal testers
FMT-317
Touchscreen controller for our FMT-313/-311/-310 series of universal testing machines (UTMs).
Measuring devices of the Q-Force
FMT-318
Measuring devices of the Q-Force series are compact and robust force transducers for Alluris testing machines.
4-point bending fixture
FMT-771
Hardened steel thrust piece for standard 3-point bending tests.
Calibration set for length measuring system
FMT-809
Calibration set to capture with the highest reproducibility the correction factor of the length measuring system for universa
ForceTester - A/D-Interface
FMT-818
Internal circuit board with additional external signal inputs as a supplement to the control unit FMT-310 with 2 analogue mea
Alarm signal unit (green/red)
FMT-822
For remote display of 2 digital switching outputs of the controls FMT-310CU and FMT-317CU.
T-slot plate for FMT-310BU
FMT-937
Dimensions 375 x 400mm, including 4 T-slot nuts
Adapter FMI-B/S force gauge for lever press
FMT-959
Adapter for centric installation of a series FMI-B/S force gauge in a standard press with D10 punch holder.
Compression plate with pin
FMT-962
Compression plates for testing compression springs with centered pin.
Protective device
FMT-964
Protective device with two wide-opening wings made of transparent Plexiglas, suitable for 1-column universal and tensile test
Double roller grip, 1 kN
FMT-966
Roller grips with 2 eccentrically mounted, self-closing pyramid rollers for tensile strength testing of welded cables.
FMI-S30 | FMI-S30 Type
FMT-978
LAN and PC interface for test stands with force gauges of the FMI-B30, FMI-B50, FMI-S30 and FMI-S30 series.